The SDI to Optical Fiber Extender set is designed to extend your SDI signals over Optical Fiber for long distance transmission up to 10km. Signals from 50 Mb/s to 3 Gb/s bandwidth can be sent without loss or compression with thinner, lighter cables for easy installations.
- SMPTE 287-2006 compliant
- Robust error-free transmission of signals from 50Mb/s to 3Gb/s up to 10 km over single-mode fiber (distance is dependent on the fiber module used).
- Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
- Supports SDI input modes:
1.SD-SDI: SMPTE 259M-C, at bitrates of 270 Mbit/s
2.HD-SDI: SMPTE 292M, at bitrates of 1.485 Gbit/s and 1.485/1.001 Gbit/s
3.3G-SDI: SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s
- Supports integrated SDI audio up to maximum 16 channels of 48 kHz audio
- Automatic video mode detection (3G/HD/SD)
- Faster data transmission
- Lower power consumption
Transmitter |
|
Input Ports | 1×BNC (SD/HD/3G-SDI) |
Output Ports | 1×Single-Mode Fiber Optical (LC connector) |
Receiver |
|
Input Ports | 1×Single-Mode Fiber Optical (LC connector) |
Output Ports | 1×BNC (SD/HD/3G-SDI) |
SDI Timging Support | SD-SDI: SMPTE 259M-C, at bitrates of 270 Mbit/s HD-SDI: SMPTE 292M, at bitrates of 1.485 Gbit/s and 1.485/1.001 Gbit/s 3G-SDI: SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s |
SDI Cable Distance | 3G up to 100 m (BELDEN 1694A cable) HD up to 200 m (BELDEN 1694A cable) SD up to 300 m (BELDEN 1694A cable) |
Optical Fiber Cable Distance | Up to 10 km |
Power Supply | 5 V/2.6 A DC (US/EU standards, CE/FCC/ UL certified) |
Dimensions | 78.5 mm (W)×143 mm (D)×30 mm (H) |
Weigh | 200 g |
Chassis Material | Aluminum |
Silkscreen Color | Silver |
Operating Temperature | 0 ºC~40 ºC/32 ºF~104 ºF |
Storage Temperature | ?20 ºC~60 ºC/?4 ºF~140 ºF |
Relative Humidity | 20~90 % RH (non-condensing) |
Power Consumption | 3 W (each) |