DVI / HDMI Sender über Twisted Pair Kabel (HDBaseT), medizinisch konform, bis 4K, inkl. Netzteil

Artikelnummer: DMCat-DVI-TX

Herstellernummer: DMCat-DVI-TX

Kategorie: Long distance über Twisted-Pair-Kabel


360,00 €

exkl. 19% USt. ,(Standard)

Muss bestellt werden. Ab Bestellung lieferbereit in 14 Tagen.

Lieferzeit: 16 - 17 Werktage



Details

DMCat-DVI-TX / DMCat-DVI-RX HDMI over Single Cat.5e/Cat.6 Extender form a product group that consists of a DMCat-DVI-TX Transmitter coupled with a DMCat-DVI-RX Receiver which employs HDMI v1.4 capability and the HDBaseT 5Play? technology to allow transmission of uncompressed, 1080p high definition television signals over a single Cat.5e or Cat.6 cable (this is the type of cable typically employed for Ethernet computer networks). HDMI v1.4 signals - including 3D and 4K x 2K formats - are supported and the system will also allow DVI signal transmission with appropriate DVI to HDMI Cable adapters. In addition, embedded 7.1CH LPCM, Dolby TrueHD and DTS-HD Master Audio capability is standard.

The DMCat-DVI-TX / DMCat-DVI-RX system can achieve signal distribution distances of up to 100 meters (325 feet) for uncompressed 1080p signals without signal degradation.

Control signals can be passed via Ethernet, Infrared or RS-232. PoH (Power over HDBaseT) technology is employed to allow powering of the Receiver from the Transmitter, negating the need for a separate power supply for that unit.

Zusatzinformation

Eigenschaften

Eigenschaften
  • Resolutions to WUXGA @ 48bits or 4K x 2K
  • Uncompressed transmission to 100 meters (325ft)
  • Uses HDBaseT performance enhancing technology
  • Supports Embedded HDMI Lossless Digital Audio
  • Compliant with HDMI v1.4a, HDCP 1.1 and DVI 1.0
  • Uses a single Cat.5e/Cat.6 Ethernet cable
  • Bi-directional infrared remote support
  • Bi-directional RS-232 and Ethernet support
  • PoH (Power over HDBaseT) capability for Receiver
  • DiMedMatrix kompatibel
SteuerungRS-232, IP, IR
HDbaseT5-Play
Reichweite100 m
Remote PowerJa
HDCP compliantJa
3D fähigJa
4K fähigJa

Inputs

HDMI IN1x

Outputs

CATx OUT1x

HDCP: HDCP konform
Übertragungsprotokoll: HDBaseT
Spannungsversorgung: 24 V DC 230 V AC
Service: 3 Jahre Bring-In-Service
Signaleingänge: RS-232 100 Mbit Netzwerk HDMI Infrarot
Signalausgänge: Twisted Pair (Netzwerkkabel)
(Maximale) Kabellänge: 100 m
Auflösung (maximal/nativ): 4K/2K
Artikelgewicht: 0,71 Kg
Abmessungen(LxBxH) ( Länge × Breite × Höhe ): 11,30 × 10,20 × 2,50 cm

Dieser Artikel besteht aus

Neuigkeiten

Die hohen Datenraten, die bei der Übertragung von Videosignalen in medizinischen Netzwerken auftreten, brachten die herkömmlichen 1 Gbit/s Netzwerkisolatoren an ihre Grenzen und führten oft zwangsläufig zum Einsatz von Lichtwellenleitern.Mit der 10 Gbit/s Baureihe EMOSAFE EN-66 lassen sich diese Umwege vermeiden und trotzdem alle Anforderungen der DIN EN 60601-1 (3. Ausgabe) erfüllen. Diese Isolatoren sind

Weiterlesen